Flipper Zero

RF Transceiver

The Flipper Zero contains a fully-controllable RF platform, based on the TI CC1101 chip, allowing for RF Signal capture, analysis and transmission.

The Flipper Zero has a built-in library of common remote control algorithms for capturing, decoding and analysing and replaying signals.

Users have full access to the radio sub-system, allowing custom RF modules to be easily built.

RFID Reader/Writer/Emulator

The Flipper Zero allows for Reading, Writing and Emulation of both High-Frequency (13.56MHz) and Low-Frequency (125KHz) RFID tags.

Low Frequency tags can be easily read, saved, cloned to a new card, or exported for analysis.

Multiple High Frequency protocols are supported, and the Flipper Zero can even sniff authentification nonces to extract unknown MIFARE keys.

Infrared Transceiver

The Flipper Zero has a powerful, fully programmable IR transceiver for IR signal capture and replay.

Out of the box, it includes a fully featured signal library for hundreds of IR-controlled devices: TVs, Stereos, Air-Con, etc.

GPIO Pinouts

The GPIO Pinouts & Breakout boards allow for controlling electronics directly via the Flipper.

The Flipper can also be used as a USB to SPI/UART/I2C bridge for debugging, flashing and fuzzing.

HID Emulation

The Flipper Zero emulate HID devices (Keyboard, Ethernet, etc) over USB, allowing it to perform BadUSB / RubberDucky attacks.

Users can easily upload and deploy scripts directly from the device for task automation, pentesting and more.

U2F Security Token

The Flipper Zero is a fully-functional U2F Key, compatible with any U2F-enabled service: Google, Twitter, LastPass, etc.

Much stronger than traditional 2FA (SMS, Email), U2F ensures that your accounts are safe and secured by the Flipper Zero.

Open Source & Extendable

The Flipper Zero is 100% Open-Source & Open-Hardware, with firmware source, schematics, cross-platform SDKs and Desktop & Mobile tools available.

All hardware and firmware components of the device are available, allowing for complete customisation – from quick Arduino plugins to pluggable hardware modules.

iButton

The Flipper has built-in 1-wire contact points to read / write and emulate “iButton” tags (TouchMemory / Dallas Keys).

Keys can be saved, exported, written to new tags or directly emulated. The contact points act as a read and a proble simultaneously for intercepting 1-Wire data.

Expandable Storage

Every Flipper Zero has a microSD card slot, enabling up to 64GB of storage space for your RFID Tags, Remotes, Captured Signals, Plugins, Modules, etc.

Flipper uses the microSD card’s SPI-interface, so it’s important to only use on-brand, legitimate cards. The Standard & Complete Packs come with tested microSD cards direct from Kingston to save you time and money.

Wireless Functionality

The Flipper has inbuilt Bluetooth, allowing for direct communication with mobile apps, and supports Wifi via the Wifi-Development module.

As an extra bonus, multiple Flippers can communicate with each other over 433MHz, allowing your to find and chat with Flipper-equipped friends..

What’s included

Basic Pack

• 1x Flipper Zero
• 1x USB-A – USB-C Cable

Standard Pack

• 1x Flipper Zero
• 1x Kingston 32GB microSD card
• 1x Silicone Protective Case
• 3x Screen Protectors

Complete Pack

• 1x Flipper Zero
• 1x Kingston 32GB microSD card
• 1x Silicone Protective Case
• 1x Wifi Dev Board
• 3x GPIO Prototyping Boards
• 3x Screen Protectors

Device Specifications

• Screen: 128×64 1.4″ LCD Monochrome (Backlit)
• Tactile Controls: 5-Way Direction Pad + Select Button
• Internal Battery: LiPo 2000mAh (7-days without charge)
• CPU:
• STM32WB55RG
• ARM Cortex-M4 32-bit 64 MHz (Application Processor)
• ARM Cortex-M0+ 32 MHz (Network Processor)
• Buzzer: 100-2500Hz
• Vibration Motor
• Memory: 1024KB Flash, 256KB SRAM
• Storage: MicroSD (Up to 64GB)
• Connectivity: USB 2.0, Type-C
• Dimensions: 100 x 40 x 25 mm
• Weight: 102g

Module Specifications

• RF:
• Chipset: TI CC1101
• Frequency bands: 315MHz, 433MHz, 868MHz, 915MHz
• TX Power: 0dBm Max (~100m transmit range)
• RFID:
• High Frequency / 13.56MHz
• ISO-14443A/B
• NXP Mifare® Classic/Ultralight/DESFire/etc
• FeliCa™
• NFC Forum protocols
• Low Frequency / 125KHz
• Modulation: AM / PSK / FSK
• Supported Cards: EM400x, EM410x, EM420x
• HIDProx, Indala
• T5577
• GPIO:
• 3.3v CMOS Level
• 5V tolerant
• Up to 20mA per digital pin
• Infrared:
• RX/TX Frequency: 800-950nm
• TX Power: 300 mW
• Bluetooth:
• Bluetooth LE 5.0
• TX Power: 0dBm Max
• RX Sensitivity: -96dBm
• Data Rate: 2 Mbps
• iButton 1-Wire:
• Dallas DS1990A
• CYFRAL

Technical Resources

• Firmware Update
• Flipper Zero Forum
• Flipper Zero Official Documentation
• Flipper Zero Official Discord
• Official Github
• GPIO / Pinout Diagram